Data Center Fiber Connectivity
MPO/MTP cassettes, high-density patch panels, trunks, LC patch cords, ODF and cabinets for data centers, carrier rooms and enterprise networks.
Quote the whole system in one go
Most projects buy cassettes, panels, trunks, LC patch cords, ODF and cabinets together. Send us your bill of materials and we return one spec sheet and one quote for the complete link, with polarity and connector gender checked end to end.
Product lines
Patching
MTP®/MPO cassettes
12-fiber (6 × LC duplex) and 24-fiber (12 × LC duplex) modules, LC side in UPC or APC.
Backbone
MTP®/MPO trunks
MPO-12 and multi-MPO trunks between racks, rows and rooms, built to length. Single-mode in G.652.D or G.657.A2.
Equipment
LC duplex patch cords
Single-mode LC/UPC and LC/APC duplex cords from cassette to equipment, including G.657.A2 bend-insensitive fiber.
Equipment room
ODF & cabinets
96-fiber ODF units and 42U cabinets, quoted together with the cabling.
Used in AI and cloud data centers, carrier equipment rooms, enterprise server rooms and campus networks.
MPO-LC cassettes and 1U panels
A 24-fiber cassette breaks one MPO link out to 12 LC duplex ports. Four cassettes fit a 1U panel, for 96 LC fibers per rack unit.
What to put in your BOM
| Item | What to specify | Example |
|---|---|---|
| Cassette | Fiber count, LC side UPC or APC, MPO gender, polarity | 12-fiber, 6 × LC/APC duplex, male MPO, Type A |
| Patch panel | Ports per panel, height, front or rear access, insertion loss and return loss limits | 72 LC fibers, 1U, front and rear access, LC IL ≤ 0.25 dB, MPO IL ≤ 0.75 dB, RL ≥ 55 dB |
| Trunk | MPO count per end, gender, polarity, length, jacket | MPO-12 female to MPO-12 female, Type A, 30 m, LSZH |
| LC patch cord | Polish on each end, cable diameter, length | LC/UPC to LC/UPC duplex, 3.0 mm, 3 m |
| ODF / cabinet | Fiber count per ODF, cabinet height and depth | 96-fiber ODF, 42U cabinet |
| Fiber | Single-mode type or multimode grade | OS2 (G.652.D or bend-insensitive G.657.A1/A2), OM3, OM4 |
Quality and testing
- Genuine US Conec MTP® connectors and Corning® fiber in MPO/MTP assemblies
- Built under an ISO 9001 quality management system
- 100% 3D interferometer end-face inspection
- Insertion loss and return loss test report with every assembly
Solution: Fiber cabling for AI data centers · GPU cluster MPO cabling
📷 待补图片（需小P提供）
认证证书图片：GR-1435、RoHS、REACH（小P 之后提供，到了换上；证书到之前页面不写这些认证）
每张证书一张图，扫描件 JPG/PNG，宽 1000px 以上
Frequently asked questions
With a Type A trunk and Type A cassettes, which LC patch cords do I need?
In TIA-568 Method A, use an A-to-B (crossed) duplex patch cord at one end of the link and an A-to-A (straight) duplex patch cord at the other end, so each transmitter meets a receiver. Tell us your polarity method and we check it on the spec sheet.
Are cassettes male or female? And the trunk?
The usual arrangement is a pinned (male) MPO port on the cassette and unpinned (female) connectors on both ends of the trunk. Two pinned or two unpinned connectors should not be mated directly.
Should the LC side be APC or UPC?
Match your equipment and existing patch cords. APC (green) has higher return loss and is common on single-mode PON and reflection-sensitive links; UPC (blue) is used on most Ethernet equipment. One project can use both.
What is the difference between G.657.A2 and standard OS2 (G.652.D) fiber?
G.657.A2 tolerates a much tighter bend radius, which helps inside cabinets and dense patch panels. It splices and mates with G.652.D fiber.
Can you quote cassettes, panels, trunks and patch cords together?
Yes. Send the full bill of materials and we quote the system as one package, with one spec sheet.
Get a free spec sheet & quote
Tell us the fiber count, length and connector. Candy, our fiber specialist, reviews every request.