Description
The “Instant Riser” for FTTB/FTTH
The Problem: Running 8 individual patch cords is messy. Splicing a raw 8-core cable in a cramped floor box is slow and expensive.
The ABPTEL Solution: Our 8-Core Breakout Cable allows you to pull one single jacket and plug in 8 ports instantly. Perfectly matched for 1:8 Splitter outputs, it reduces installation time by 70% compared to field splicing.
Engineered for Tidy Cabinets
1. Color-Coded Organization
Stop guessing which fiber is which. Each of the 8 legs is color-coded according to the TIA-598 standard (Blue, Orange, Green, Brown, etc.), making troubleshooting foolproof.
2. Rugged Breakout Point
The transition from the main 5.5mm jacket to the individual legs is protected by a heavy-duty, adhesive-lined heat shrink (or metal breakout kit), ensuring no fibers are crushed during pulling.
3. G.657.A2 Bend Insensitive
Designed for tight riser closets. The fiber can bend down to a 7.5mm radius without significant signal loss, protecting your network from “macrobend” failures.
Technical Specifications
| Connector A / B | SC/APC (Green) to SC/APC (Green) |
| Fiber Mode | Single Mode G.657.A2 (Compatible with G.652.D) |
| Main Cable Diameter | 5.5mm (Yellow LSZH Jacket) |
| Breakout Leg Type | 2.0mm Reinforced Legs OR 0.9mm Tight Buffer |
| Insertion Loss | ≤ 0.2 dB (Premium Low Loss) |
| Return Loss | ≥ 60 dB (APC Polish) |
| Fanout Length | Standard 0.5m (Customizable to 1.0m) |
Length：10m, 20m, 30m, 50m, 100m
Breakout Type：2.0mm (Rugged), 0.9mm (High Density)
Engineering FAQ
Q: Should I choose 2.0mm or 0.9mm legs?
A: Choose 2.0mm for most patch panels as it offers better protection against pinching. Choose 0.9mm only if you have a very high-density cassette with limited space.
Q: Can I get “Staggered” (Stepped) legs?
A: Yes! Staggered legs (e.g., leg 1 is shortest, leg 8 is longest) help manage cable slack in side-entry patch panels. Please add a note to your order for this customization.
