Description

The “Locatable” Standard for US Last-Mile Drops

Why Toneable? Once a standard dielectric cable is buried, it’s invisible to utility locators. The ABPTEL Toneable Flat Drop solves this by integrating a 24AWG Copper Tone Wire alongside the fiber. Technicians can trace the exact underground path years later, preventing accidental cuts during future construction.

Factory-Terminated Precision: Stop splicing in the mud. Our assemblies come pre-terminated with IP68 Hardened SC/APC (OptiTap® Compatible) connectors, tested to Telcordia GR-326-CORE standards for insertion loss <0.3dB.

Engineered for Tough OSP Environments

1. Universal Compatibility

100% mate-compatible with Corning OptiTap® MSTs, CommScope hardened terminals, and generic H-Connector systems. Designed for “Plug-and-Play” FTTH deployment.

2. Direct Burial & Aerial Ready

Features a UV-stabilized PE jacket with 2200N/100mm Crush Resistance. Suitable for direct burial (trenched) or self-supporting aerial spans up to 400ft (NESC Heavy loading).

3. Gel-Filled or Dry Core

Available in standard Gel-Filled (maximum water blocking) or modern Dry-Block (cleaner prep) configurations. Uses G.657.A1 bend-insensitive fiber for tight corner routing.

4. High Tensile Strength

Reinforced with dual FRP strength members. Withstands 1350N installation tension. Connector pull-out force >100 lbs (450N), meeting GR-3120 requirements.

Length:

• Values: 50ft, 100ft, 150ft, 250ft, 300ft, 500ft, 1000ft, 2000ft.

Connector End B:

• Values:
  • Hardened SC/APC (H-Conn)
  • Standard SC/APC
  • Stub End (No Connector)

Technical Specifications

Fiber Count / Type	1 Fiber / Single Mode G.657.A1 (Corning SMF-28e Compatible)
Connector A	Hardened SC/APC (Green) – IP68 Rated
Connector B Options	Hardened SC/APC (for daisy chain) OR Standard SC/APC (for NID) OR Blunt Stub
Insertion Loss	Typical ≤ 0.15 dB / Max ≤ 0.30 dB
Return Loss	≥ 60 dB (APC Polish)
Cable Structure	Flat Profile (8.1mm x 4.5mm) with Tone Wire Web
Tone Wire	24 AWG Copper Conductor (Easy-Peel Web)
Operating Temp	-40°C to +70°C (-40°F to 158°F)

Frequently Asked Questions

Q: What is the “Tone Wire” used for?

A: It’s a copper wire embedded in the cable jacket. By connecting a tone generator to it at the NID, utility workers can locate the cable underground using a receiver wand, avoiding accidental cuts during future landscaping or digging.

Q: Does it come with a pulling eye?

A: Yes. All pre-terminated lengths include a factory-installed pulling sock (mesh grip) to protect the connector housing during conduit pulls. Max pulling tension is 100 lbs (45kg).